How to get rid of mold on Garden Hose?

[c***@hotmelt.com]

Anyone have a solution to get rid of those ugly black spots that
accumulate on a hose that is wrapped around one of those wind-up
devices? I guess water drips in/around the hose and seeing as it's
probably darker in the middle/end, the hose gets ugly and uglier after
you pull the first 25 feet out. The outer length stays nice, and this
hose is maybe 2 years old... no leaks, cracks or whatever, but the
missus wants me to clean it.

Thought about bleach, but will that actually attack the vinyl and make
it sticky? Looking for a solution that costs less than tossing the
hose and buying a new one when other than the black spots... there's
nothing wrong with it.

TIA! Mike

[Doug Kanter]

Try white vinegar, or put on some rubber gloves and attack it with Lysol.

Post by c***@hotmelt.com
Anyone have a solution to get rid of those ugly black spots that
accumulate on a hose that is wrapped around one of those wind-up
devices? I guess water drips in/around the hose and seeing as it's
probably darker in the middle/end, the hose gets ugly and uglier after
you pull the first 25 feet out. The outer length stays nice, and this
hose is maybe 2 years old... no leaks, cracks or whatever, but the
missus wants me to clean it.
Thought about bleach, but will that actually attack the vinyl and make
it sticky? Looking for a solution that costs less than tossing the
hose and buying a new one when other than the black spots... there's
nothing wrong with it.
TIA! Mike

[Craig]

replying to Doug Kanter, Craig wrote:
There is a trick I learned but you have to do it when the hose is new. Take
paste wax and cover the whole hose and rub it in and then clean it off. This
worked for me.

--
for full context, visit https://www.homeownershub.com/lawn-garden/how-to-get-rid-of-mold-on-garden-hose-5304-.htm

[Colonel Edmund J. Burke]

Post by Craig
There is a trick I learned but you have to do it when the hose is new. Take
paste wax and cover the whole hose and rub it in and then clean it off. This
worked for me.

Stoopid asshole.

[Warren]

Post by c***@hotmelt.com
Anyone have a solution to get rid of those ugly black spots that
accumulate on a hose that is wrapped around one of those wind-up
devices? I guess water drips in/around the hose and seeing as it's
probably darker in the middle/end, the hose gets ugly and uglier after
you pull the first 25 feet out. The outer length stays nice, and this
hose is maybe 2 years old... no leaks, cracks or whatever, but the
missus wants me to clean it.

Cleaning it is only a temporary fix. It's going to keep coming back until
you take care of the cause. Find the leak, and fix it. Unroll the hose, and
let it sit in the air and the sunlight to let the anaerobic mold die. Then
wipe it off with a rag dampened with detergent, and let it dry completely
before rolling it up again. If you fixed the moisture problem, the mold
won't come back. If you didn't fix the moisture problem, it really doesn't
matter what you clean it with because the mold will come back.
--
Warren H.

==========
Disclaimer: My views reflect those of myself, and not my
employer, my friends, nor (as she often tells me) my wife.
Any resemblance to the views of anybody living or dead is
coincidental. No animals were hurt in the writing of this
response -- unless you count my dog who desperately wants
to go outside now.
What's on TV? See the new fall network schedules online:
http://www.holzemville.com/mall/television/fall2005.html

[Jerico46]

As long as the garden hose remains outdoors in a damp climate on the ground, placed on supports above the ground, or rolled on a holder it will be attacked by black mold whether in Pennsylvania or North Carolina or in between. Bright yellow and green hose, red hose, clear hose. Using a tub, I soaked my hose, fully submerged, in up to 3 X the recommended solution of Clorox, Lysol, Ferti-lome Liquid Systemic Fungicide II, and Moldstat 2. and a combination of all four. The hose laughs at me. I took the hose to the sand pit and soaked them all in gasoline and lit, ball of fire. No more laughing, no more mold, no more hose. I just replaced with black hose. I can't see the mold now. This is not a joke

[Rolling Thunder]

Post by c***@hotmelt.com
Anyone have a solution to get rid of those ugly black spots that
accumulate on a hose that is wrapped around one of those wind-up
devices? I guess water drips in/around the hose and seeing as it's
probably darker in the middle/end, the hose gets ugly and uglier after
you pull the first 25 feet out. The outer length stays nice, and this
hose is maybe 2 years old... no leaks, cracks or whatever, but the
missus wants me to clean it.
Thought about bleach, but will that actually attack the vinyl and make
it sticky? Looking for a solution that costs less than tossing the
hose and buying a new one when other than the black spots... there's
nothing wrong with it.
TIA! Mike

Try deck cleaner. Worked on a lawn chair with mold on the plastic.

Thunder

[JohnH]

Post by c***@hotmelt.com
Thought about bleach, but will that actually attack the vinyl and make
it sticky?

Tilex ought to work pretty well, but as Warren said, you need to cure the
problem, not the symptom.